Rooms made to measure
ADAPTABILITY OF SPACE
With the spatial flexibility of the elements (production of custom elements and processing of elements) we achieve full use of space. You can adjust the size of the furniture, colors, handles and shape to suit the space and your wishes. We can customize desks, cabinets,…
- OPEN SHELVES
- BUILT-IN CABINETS
- PROCESSING OF ELEMENTS,
- ADDITIONAL MANUFACTURE TO ORDER FOR THE MAGNET PROGRAM.
Measurement flexibility of open custom elements.
Design and assembly of custom desks. The desk is an important element, so we allow custom sizes and a choice of shapes, colours and materials. Because it is important that the child gets used to working at a desk from an early age, Alples offers several different models of these.
You can assemble the desk yourself! We design a desk to measure and according to your wishes, which can be a classic flat shape or a table in a corner.
The maximum length of the plates is 2,400mm.
The thickness of the plates is 38mm.
Custom built-in cabinets compatible with Magnet furniture
With a custom-made Alples built-in wardrobe, you will gain storage space tailored to your individual needs and desires. With it, you will achieve full use of space even when it is complexly designed. There is virtually no limit to custom manufacturing. The cabinet can extend from wall to wall and from ceiling to floor, but it can also be shorter and end with a decorative side or. lower than the ceiling and ends with a cover plate. You can choose between sliding and classic doors. There are many different materials and colors available for both types of doors, from wood and colored decors and high-gloss decors to colored glass and mirrors. You can also opt for a corner built-in closet or a closet in a sloping attic. The advantage of our built-in cabinets is compliance with other Alples furniture. In this way, it is possible to equip the entire room with the same furniture.
PROCESSING OF ELEMENTS
Processing is a dimensional change of a standard element (processing does not mean making a new element). A standard element is processed to reduce its width, height or depth.
We process everything
- open cupboards,
- cabinets and wardrobes with doors and without drawers,
- cabinets and wardrobes with doors and drawers in height,
- bridge in height,
- corner cabinets,
- sliding cabinets,
- hanging end,
- all shelves (wall, additional, internal, cover plates),
- hanging cabinets with doors and
- beds and drawers under the beds along the length and of course
- desks across the width.
Cabinets and wardrobes with doors and without drawers
Cabinets and wardrobes with doors and drawers in height
Bridge in height
All shelves (wall, additional, internal, cover plates)
Hanging cabinets with doors
Beds and drawers under the beds along the length
Desks across the width
ADDITIONAL MANUFACTURE TO ORDER FOR THE MAGNET PROGRAM
We make custom panels and shelves. You choose the width and length, and we make a plate of flat or curved shape and close everything with a quality edge tape.
To get started, check out the site here.